2.0mm Standard Joint Tile Leveling Clip 1.5g PP Plastic for Ceramic Floor Installation

2.0mm Standard Joint Tile Leveling Clip — The Versatile All-Rounder

The YF-TLC-1.5-2.0 is the most versatile clip in our lineup, designed for 2.0mm grout joints — the industry standard width for ceramic and porcelain floor tiles in residential and light commercial applications. At 1.5g per clip with a 37mm total height, this model balances clamping precision with ease of handling.

Why 2.0mm Is the Go-To Joint Width

The 2.0mm grout line is specified in over 60% of tile installation projects worldwide. It provides enough tolerance for minor tile size variations while maintaining a clean, professional appearance. This clip guarantees uniform 2.0mm spacing across the entire floor — no shimming, no guesswork, no callbacks for lippage complaints.

Technical Specifications

Quality Control

Every batch of clips undergoes tensile testing to verify the break-off force falls within 18-22kg — strong enough to hold tiles in position during curing, yet cleanly breakable with a single kick. Clips that snap prematurely or fail to break at the designated point are rejected. Our 6,800m² factory operates 20 automated production lines with a daily output exceeding 200,000 units, backed by 15 years of OEM/ODM experience.

Installation Workflow

1. Spread tile adhesive with appropriate notched trowel
2. Position clip so the 2.0mm spacer sits between tiles
3. Set adjacent tile, insert wedge, tighten with pliers
4. Cure for 24 hours
5. Kick off clip base — the break-off point fractures cleanly below the tile surface

Recommended For

• Standard ceramic floor tiles (300×300mm to 600×600mm)
• Polished porcelain tiles in living rooms and hallways
• Kitchen and bathroom floor installations
• Light commercial spaces (retail, office lobbies)

Product Highlights

• Industry-standard 2.0mm spacer: Matches over 60% of global tile installation specifications — deployable across ceramic, porcelain, and light stone without changing clip type.
• 100% virgin PP material: Zero regrind content eliminates the risk of brittle fracture during wedge tightening, a common failure point in low-cost recycled-material clips.
• 21mm inner base width: Provides sufficient grip surface for the red TLW-92 wedge while maintaining a compact clip profile that won't interfere with tight tile layouts.

FAQ

Q: Can I use these clips with natural stone tiles?
A: Yes, provided the stone thickness is 3-10mm and the surface is flat-bottomed. For uneven natural stone (slate, cleft-face), we recommend wider joints and our 3.0g clips for higher clamping force.

Q: Do I need special tools?
A: We recommend using our tile leveling pliers (Model YF-TLP-R) for consistent wedge tension. Manual pushing may result in uneven pressure and incomplete leveling.

Q: How many clips should I order for a 50m² project?
A: Approximately 350-400 clips for standard 600×600mm tiles (7-8 clips/m²). We suggest ordering 10-15% extra to account for breakage during handling and irregular cuts at room perimeters.

Q: Can the 2.0mm clip be painted or coated for colored grout matching?
A: The clip spacers are removed before grouting, so color matching is unnecessary. For installations where spacer color visibility during layup matters, the white translucent PP is a neutral tone compatible with all grout colors.

Q: What is the shelf life of unused clips?
A: When stored in a dry, shaded environment at 5-35°C, YiFang PP clips maintain full mechanical properties for 3+ years. Avoid prolonged direct sunlight exposure during storage to preserve UV stabilizer effectiveness.