|Place of Origin
|Hebei, China (Mainland)
Self Adhesive Pins High Quality Supplier In China
Self stick insulation hangers&insulation pins
It is a self stick insulation pins with a self stick base, the self stick base is made up from 2"×2" metal base with a double faced tape attached a metal nail, peel the release paper on the base and firmly press the pin to the place where need to install insulation, work with the self locking washers or Dome caps to fasten the insulation materials
|Galvanized iron, stainless steel with self-adhesive
|24*24, 35*35, 50*50 (mm)
|20mm-300mm as you need
Steps for usage
Clean the construction surface during construction, and then stick a little glue on the bottom of the mesh insulation nail to the construction surface. After the glue is dry, it can be applied. The insulation board is penetrated through the nail tip, and then the self-locking gasket is used to pass the insulation nail. The tail, then press the insulation board, and bend the tail of the insulation nail according to the thickness of the insulation layer.
1, Base are tight with pins.
2, Pin is soft and easy for bending.
3, Pin is sharp, easy go through any insulation blankets.
Langfang Yifang Plastic Co.,Ltd. is a manufacturer of insulation nails, plastic discs, The valve of injection molded parts, Anchor bolt and any of the plastic products,with well-equipped testing facilities and strong technical force.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Welcome new and old customers from all over the word to contact us for future business relationships and mutual success!
Contact Us at Any Time