Hvac Parts 50mm Adhesive Aluminium Insulation Stick Pins
Insulation anchor thermal insulation pin specification:
|No.1||25*25||1.70||From 20mm to 300 mm are standard||Self - locking washers are available in a variety of sizes, Shapes. and materials|
|No.2||35*35||2.67&3.00||From 20mm to 300 mm are standard||Self - locking washers are available in a variety of sizes, Shapes. and materials|
|No.3||50*50||2.67&3.00||From 20mm to 300 mm are standard||Self - locking washers are available in a variety of sizes, Shapes. and materials|
Recommended assembly method :
1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2.Remove the protective release paper taking care not to touch the adhesive.
3.Place the hanger in the required position and press the base against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours.
Pin cover :
Protect people hand from being injured when putting insulation.
Insulation Anchor thermal insulation pin usage :
Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing works, and for the duct-lining.
It has anti-aging, anti-temperature sudden change, anti-corrosion, cold-resistant and heat-resistant; high bearing capacity, high pressure bearing and good tensile performance; it is not easy to deform, moisture-proof, vibration-relieving, and good thermal insulation after loading.
Langfang Yifang Plastic Co.,Ltd. is a manufacturer of insulation nails, plastic discs, The valve of injection molded parts, Anchor bolt and any of the plastic products,with well-equipped testing facilities and strong technical force.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Welcome new and old customers from all over the word to contact us for future business relationships and mutual success!
Contact Us at Any Time