High Bearing Capacity Plastic Insulation Anchors With 50mm / 55mm / 60mm Disc
Insulation nail is a special engineering plastic expansion nail which fixes the insulation board on the wall. Insulation nail is a special anchor for external wall insulation, which is widely used in building decoration and anchorage of wall insulation house. It consists of galvanized screw, nylon riser and fixed wafer. According to the thickness of insulation layer, it can be divided into many specifications.
|Material: PE, PP||Length: 60,80,100......220mm or customized|
|Diameter: 8mm-10mm||Thermal conductivity:0.03|
|Nail length: 60,80,100......220mm or customized||The nails of diameter: 3.6mm or 3.3~3.6mm|
|Operation temperature: 200||Breaking elongation: 90|
|Color: white and grey or as client’s design||Diameter of table: 5.0or 6.0cm|
We use the best PE, PP to ensure the purity of the insulation nails, the production is pure and strong. and let me via a photo show you clearly!
High quality metal wall insulation nails, insulation fastener Uses: Widely used in floor heating industry, power plants, petrochemical external wall insulation engineering, architectural wall reinforcement, and the construction industry.
1. Breakthrough traditional of insulation shooting nails limited, Provides newsolution programme for insulation system of construction;
2. Tight speed 10 times above than traditional drilling and ancher way,construction speed 6-8grain per minute;
3. Avoid complex steps of drilling, tight directly. And no dust of drilling producing;
4. Without power supply,conveinent and practical;
5. Suit for sand-lime bricks,concrete and steel substrates;
6. Applicable to all kinds of insulation materials, such as glass wool, rock wool and so on;
7. The low heat conductivity doesnot sffect the insulation effection;
8. No presure for insulation board;
9. Application of insulation thickness 60-220mm.
Packing & advantage
high quality metal wall insulation nails/ insulation fastener/ insulation anchor packing:
a. Plastic films + carton+ pallet .(500/1000pieces per carton)
b. As the client's design.
Packing step: 1. We pack it in the polythelene bag first to protact them from damp.
2. Put the polythelene bag into the carton.
4. Pack it on the tray and pack the pallet.
5. Cover the pallet with preservative film to prevent moisture.
Langfang Yifang Plastic Co.,Ltd. is a manufacturer of insulation nails, plastic discs, The valve of injection molded parts, Anchor bolt and any of the plastic products,with well-equipped testing facilities and strong technical force.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Welcome new and old customers from all over the word to contact us for future business relationships and mutual success!
Contact Us at Any Time