|
Product Details:
Payment & Shipping Terms:
|
| Material: | HDPE,NYLON, PE OR NYLON | Diameter: | 8MM |
|---|---|---|---|
| Length: | 8*105mm8*126mm,8*142mm, 8*95mm 8*105mm,8*115mm | Capacity: | ≥0.8KN |
| Cap Diameter: | 60mm | Color: | Yellow , White,grey Or Your Need |
| High Light: | plastic insulation fixings,plastic insulation fasteners |
||
60mm Washer Plastic Insulation Anchors 8*95mm With Steel Nail Interior
Product Description
Plastic Cap insulation anchor also called screw -back nylon anchors, It's made of high strength super tough nylon and anti-rust treated high strength steel. The structure of the tail section is equiped with screw-back expansion anchors, firmly fixed on various of wall materials, especially suitable for hollow brick fastening. The expansion tube and pressure plate is integrated structure, more suitable for steel wire mesh insulating Panel fixing.
Product Parameters
| Material: | PE, Nylon |
| Cap diameter: | 60mm |
| Specification: | 8*90mm 8*105mm,8*115mm,8*122mm,8*126mm,8*142mm |
| Packing: | 500 or 1000pcs/ctn |
| Carrying Capacity: | ≥0.8KN |
| Coefficient of thermal conductivity: | ≥0.004 |
| Install Qty in XPS exterior wall thermal insulation systerm: | The average quantity is 6pcs/m2 in the 1 to 10 floor, 7pcs/m2 in 11 to 20 floor, 9 pcs/m2 in 21 to 26 floor. |
Product Display
Product Usage
a.When buildings‘ external thermal insulation system need reinforcement , plastic Cap insulation anchor can be used.
b. Too much wind or building wind tunnel and other important parts need fastened with Plastic Cap insulation anchor.
c. High-rise, rise building and normal construction outer corner nodes need fastened with plastic Cap insulation anchor.
d. When the insulation Board in the exterior insulation system is XPS, need plastic cap insulation anchor.
Product Feature
The product produced by our factory improved on the basis of the original details, which increases the nail bonding strength between the pipe and the wall, and changed the original appearance and mechanical properties of nylon Wick, on the whole, more rational, more mature.
a. Made of high quality fine becomes modified engineering plastics.
b. Good weather resistance and aging resistance, at-40 ° c to + 70 degrees Celsius temperature and long-term stability.
c. Shock-resistant, weather-resistance and fracture-resistant, stable and durable.
d. Hammer tapping, the construction is convenient, fast, economical, safe.
Company Introduction
Langfang Rongfeng Plastic Products Co.,Ltd. is a manufacturer of insulation nails, plastic discs, The valve of injection molded parts, Anchor bolt and any of the plastic products,with well-equipped testing facilities and strong technical force.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Welcome new and old customers from all over the word to contact us for future business relationships and mutual success!
Other products
Contact Person: Sales Manager
Tel: +8619931318283
